Specifications: -
>Device Purpose/Marketing Target: Ultra-low THD+N Analog to PCM Digital Converter For Audio Measurement, E1DA 9038S/D DACs users, DIYers, Audio Tech Bloggers-reviewers
>Materials: - Sandblasted/Black Anodized aluminum/Laser mark/ES9822Pro/OPA1612/RT6863S, Susumu, Viking Resistors, Murata, Samsung C0G caps, Taiwanese Connectors/Switches
>Dimensions: 104x61x39mm (PCBA 90x50x29mm)
>Weight: 157g (PCBA 34g)
>Power: USB-C +5V rail, <250mA current/separated for ADCiso - power it first!
>Input: - USB bridge Comtrue CT7601CR(ADCiso CT7601PR with native 768K) Custom FW XLR L/R (FDA) up to 10Vrms AUX 2.5mm Jack up to 43Vrms
>Output: USB-C, PCM up to 32b/768kHz/ADCiso has that connector isolated with 8pF Please do not use a screwdriver to fix the DATA USB-C cable, use your fingers instead to avoid overstrength and damage to the USB-C socket.
>Latency: 5mS@192k ASIO4ALL REW Measured as a physical delay/2 from ADC input to the 9038D output
Input Ranges/Impedance: - 1.7Vrms 640Ω 2.7Vrms 1kΩ 3.5Vrms 1.3kΩ 4.5Vrms 1.66kΩ 6.7Vrms 2.46kΩ 7.6Vrms 2.82kΩ 8.5Vrms 3.12kΩ 10Vrms 3.48kΩ 43Vrms 13.6kΩ Note: Unbalanced impedance about 30% less.
>Frequency Response: 0.8Hz-320kHz @ 32b/768kHz -3db, depends on the interpolation filter setting
Please refer to the calibration files.
SNR=DR@MONO: -
Grade A 128-129db(A)
Grade B 126-128db(A)
Grade C 125-126db(A)
Grade 0 >129db(A)
STEREO mode has 3db worse SNR/DR. Measured at 32/48 AP2700 THD+N@1kHz@-0.5dbFS SR48kHz BW 20-20kHz 0.00007%, SINAD >123db typical for Grade A, 122db Grade B THD@1kHz@-0.5dbFS BW 22-22kHz <0.00003%(0.3-0.2PPM) typical for 32b/48kHz all harmonics level -135-145db
>Crosstalk:
< -140db@1kHz /ADCiso <-153db
if not used inputs are shorted Windows 10 doesn't need the driver but Windows 7 does and the driver installation may require manual installation. So, if you are not ready for that the good idea just update W7 for W10.
Đang cập nhật
Đang cập nhật