Premium Parts:

  • Alps Potentiometer, JRC MUSES72320V Digital Volume Controller,
  • AudioCapX PPFXS Coupling Capacitors
  • Nichicon Audio-grade Filter Capacitors
  • Porcelain Tube Sockets, and Carbon film resistors.

High purity Silver Plated Signal wires have been used in the Pearl 30i, which guarantees an incredibly stable signal transfer to lower the signal attenuation and interference.

Standard with a full aluminum remote control, Pearl 30i can also memorise last operation of the unit once switched off.

Available front finish: Black.

Specification:

  • Power Output:

TR 145W+145W (Triode Mode)

UL 230W+230W (Ultralinear Mode)

  • Frequency Response:

5Hz~65kHz (-3dB, TR, RCA)

5Hz~75kHz (-3dB, UL, RCA)

5Hz~34kHz (-3dB, TR, XLR)

5Hz~35kHz (-3dB, UL, XLR)

  • THD:

0.2% (1W/1KHz, 5% Under Rated Power)

  • S/N Ratio:

96dB (RCA, A Weighted)

100dB (XLR, A Weighted)

  • Input Sensitivity:

450mV (Integrated)

1100mV (Pre-IN)

  • Input Impedance:

20kΩ

  • Output Impedance:

4Ω, 8Ω

  • Input Terminals:

XLR, AUX1, AUX2, AUX3, AUX4, PRE-IN (P.XLR, P.RCA)

  • Output Terminals:

SUB OUT, 4 Ohm and 8 Ohm Speaker Taps.

  • Power Consumption:

570W (min) 1300W (max)

  • Tubes:

MULLARD CV4004/12AX7×2, TUNG-SOL 6SN7GTB×4, TUNG-SOL KT170×8

  • W×D×H:

Amplifier Unit: 430mm×555mm×252mm

  • Power Supply Unit:

430mm×517mm×129mm

  • Net Weight:

Amplifier Unit: 46.5 KG

Power Supply Unit: 43 KG

Đang cập nhật

Đang cập nhật