| Symmetrical signal processing with exact signal transmission over the entire frequency spectrum and extremely low harmonic distortion. |
| Dynamic range of more than 120 dB, wide bandwidth and high transient response due to short signal paths. |
| Outstanding ESS SABRE32 DAC (digital-to-analog converter) with a resolution of 32 bits and a sampling rate of up to 384 kHz. |
| Automatic adjustment of the sampling rate (44.1 kHz to 384 kHz). |
| USB Audio (up to 32 Bit / 384 kHz and up to DSD256). |
| Can be used with up to four dynamic headphones. |
| 3 balanced headphone sockets (2 x 4.4 mm Pentaconn jack socket, 1 x XLR-4 socket). |
| High-quality XLR-3/1/4" (6.35mm) jack combo socket for connection of unbalanced headphones. |
|
High flexibility due to different connection possibilities: Digital inputs: S/PDIF coaxial/optical, USB Analog inputs: balanced XLR-3, unbalanced RCA |
| Analog output: balanced XLR-3, level adjustable (for connection of active loudspeakers or a power amplifier) |
| Engineered and handcrafted in Germany |
Đang cập nhật
| Dimensions (W x H x D) | approx. 224 x 44 x 306 mm |
|---|---|
| Weight | approx 2.25 kg |
| Max. output power | approx. 480 mW @ 1 kHz and 600Ω load at the XLR-4 output |
| Frequency response | < 10 Hz to > 100 kHz |
| Crosstalk attenuation | min. 93 dB @ 1kHz |
| THD + N | < 0.001 % |
| Gain UNBAL input / XLR-4 output |
adjustable 14 dB, 22 dB, 30 dB, 38 dB, 46 dB |
| Gain BAL input / XLR-4 output |
16 dB |
| Dynamic range | > 115 dB @ 600Ω load (A-weighted) |
| Temperature range | operation: 5 to 45 Cº storage: -20 to 70 Cº |
| Relative air humidity (non-condensing) | operation: 10 to 80% storage: 10 to 90% |
| Power Supply | |
| Voltage range | 100 - 240 V ~, 50 - 60 Hz |
| Power consumption | 12 W nominal (2 x 300Ω headphones connected to the 4.4mm outputs) max. 18 W (2 x 16Ω headphones connected to the 4.4mm outputs) |
| Pin assignment of IEC mains socket |  |
| Analog input BAL (XLR-3) | |
| Pin assignment |  |
| Max. input level | 18 dBV |
| Input impedance | 20 kΩ |
| Analog input UNBAL (RCA) | |
| Max. input level | 20 dBV (with minimum amplification GAIN) |
| Input resistance | 10 kΩ |
| Digital inputs COAX/OPT (coaxial/optical) | |
| Standard | S/PDIF |
| Supported data streams | PCM |
| Supported sample rates | coaxial/optical: 44.1; 48; 88.2; 96 kHz coaxial: 176.4; 192 kHz |
| Digital input USB (USB Type B) | |
| USB standard | min. USB 2.0 |
| USB audio class | USB Audio Class 2 |
| Supported file formats | PCM: 32 bits, 44.1; 48; 88.2; 96; 176.4; 192; 352.8; 384 kHz DSD: 64 (2,822, 400Hz), 128 (5,644, 800Hz), 256 (11,289, 600 Hz) |
| Analog output BAL (XLR-3) | |
| Pin assignment |  |
| Max. output level | 20 dBV |
| Output impedance | 270Ω |
| Headphone output (1/4" (6.35mm) jack socket) | |
| Pin assignment |  |
| Impedance | min. 16Ω |
| Headphone output (XLR-3) | |
| Pin assignment |  |
| Impedance | min. 16Ω |
| Headphone output (XLR-4) | |
| Pin assignment |  |
| Impedance | min. 16Ω |
| Headphone outputs (Pentaconn, 4.4mm) | |
| Pin assignment |  |
| Impedance | min. 16Ω |
.png)
