Little Dot MKIV Mk4 SE WE403AX2 6H30PIX2 Headphone Tube Amplifier + Pre-Amplifie

also adds in user-tweaking options such as two gain switches to delivery maximum compatibility with all your headphones, regardless of impedance or sensitivity. Also available for the very first time in a Little Dot amplifier, is an internal jumper to allow use with a wider range of driver tube-rolling, including the EF92, CV131, WE403A/B, GE5654, M8100, CV4010, EF95, 6JI as well as all equivalents, derivatives, and direct replacements to these vacuum tubes! 


TECHNICAL SPECIFICATIONS:
SEPP (Singled-ended Push Pull) OTL in Class-A
Frequency response: 10 hz~100 Khz (-1dB)
THD+N: 0.1% (100 mW @ 300 ohm)
Power Output:
500 mW @ 300/600 ohm
300 mW @ 120 ohm
100 mW @ 32 ohm
Power Consumption: 30W (228V x 0.133A)
Variable Gain: 3,4,5, or 10x
Recommended Load Impedance: 32 ohm~600 ohm
Input Impedance: 50K ohms
Pre-Amplifier Output Impedance: 600 ohms
Pre-Amplifier Gain: 3-10x (also controlled via gain switches)
Pre-Amplifier Voltage: 10V RMS
Pre-Amplification circuit includes both driver and power tubes
Driver Tubes: 2x M8100/CV4010 (MK IV SE)
Power Tubes: 2x 6H30PI Gold-Pin (MK IV SE)
High quality aluminum chassis
Neutrik Headphone Jack (SE version only)
American CMC/Van Den Hul RCA Jacks (SE version only)
Dimensions (Metric): 320mm deep by 220mm wide by 143mm high
Dimensions (English): 12.6 inches deep by 8.66 inches wide by 5.62 inches
Weight: 3.5 Kg or 7.7 lbs
1 Year Little Dot Warranty (2 Year Little Dot Warranty for MK IV SE)
Available in either 120VAC or 220VAC