AI Ground Detection Each unit will automatically disconnect the ground on that device
Ground Safe Auto reinstatement of ground connection to pass current if a fault is detected
Voltage rating 90 – 240 volts
Surge overload rating 220A
Continuous current rating 10A (1100W – 2400W)
Universal IEC Hospital-grade IEC connectors
Dimensions 68 x 37 x 32 mm / 2.7” x 1.5” x 1.3”
Weight 61g / 2.2oz

Đang cập nhật

AI ground detection.

With a GND Defender at the IEC power input, it will intelligently detect and remove the ground loop at the component.

Behind this, the GND Defender:

  • Intelligently breaks DC ground loops to eliminate ground loop hum
  • EMI shielding is retained
  • Equipment Safety is unaffected (not a ground lift – so maintains equipment safety ground)

If multiple ground loops exist, more than one GND Defender may be required.

The GND Defender is smarter than the average ground lift. By a long way.

GND Defender from iFi audio
 
 

Battleship build.

The GND Defender is not only at the cutting-edge in terms of technology but also safety:

  • High-performance glass passivated semiconductor
  • High Case Dielectric Strength of 1500VRMS UL Listed
  • X7R Capacitor
  • High-temperature stability
  • Flame resistant IEC socket/connector/chassis
  • Fireproof polymers UL94-V0

Remember that best practice is to always keep at least one direct power cable connection.

Show More
 

Surge overload rating of 220A. With a maximum rating >10A, continuous current rating 7A, it handles all voltages around the world from 90-240V.

Intelligently block DC voltages from the mains to eliminate transformer hum. Equipment safety is unaffected.

EMI shielding is retained.

 

Support

AI Ground Detection Each unit will automatically disconnect the ground on that device
Ground Safe Auto reinstatement of ground connection to pass current if a fault is detected
Voltage rating 90 – 240 volts
Surge overload rating 220A
Continuous current rating 10A (1100W – 2400W)
Universal IEC Hospital-grade IEC connectors
Dimensions 68 x 37 x 32 mm / 2.7” x 1.5” x 1.3”
Weight 61g / 2.2oz