• Effectively reducing the left and right channel crosstalk
  • Easily drive a variety of different impedance headphones
  • A high-current discrete Class A output stage headphone amplifiers
  • Rigorous design, reasonable layout, elegant lines and solid materials

Đang cập nhật

Features:
1.AC115V/230V international voltage input.
2.Rigorous design, reasonable layout, elegant lines, solid materials.
3.Aluminum chassis, before grinding Shahoulasi processes, machines all black.
4.RCA single-ended and balanced XLR inputs, input switching and gain adjustment.
5.Start-up delay, DC offset, overload, protection circuitry to ensure the safe use of the machine.
6 tri-band balanced sound correctly, the output resistance low current, suitable for most headphone mix.
7.Adjust the volume potentiometer placed at the back of the input stage, effectively shortening the audio channel path, reducing
interference.
8.Using two 25W seal ring cattle, independent power between left and right channels, effectively reducing the left and right
channel crosstalk.
9.H10 is a high-current discrete Class A output stage headphone amplifiers, each channel consists of two independent
amplification circuit, has RCA inputs, balanced input, you can easily connect a variety of sources.
10.Machine using a buffer amplifier plus pre-amplification stage main components. Buffer preamp gain adjustment function with
four segments, with the four pairs of audio power output circuit tubes on the CPI, you can easily drive a variety of different
impedance headphones.

 


Parameters:
Signal Input: 2x XLR female, balance
2x RCA, unbalanced
Maximum input level: +21 dBu, impedance 10kΩ
Input impedance: XLR: 10kΩ, RCA: 68kΩ
Input Sensitivity: +6 dBu
Main amplifier gain: +8 dB
Main amplifier gain adjustment range: -4 / +2 / +8 / +14 / +20 dB
Frequency response: 0-55kHz (-0.5dB)
Damping Factor:> 400 @ 50Ω
Dynamic range:> 128dB (A-weighted)
Background noise: <-100dBu (A-weighted)
THD + N (1kHz 1W @ 100Ω): <0.00035%
THD + N (1kHz 0.5W @ 32Ω): <0.0007%
Crosstalk:-110db (1kHz)
Headphone Output: 1x 6.35mm TRS Jack
Power supply voltage: 230V AC/115 AC; 50/60Hz
Power consumption: ≤ 20VA
Machine Standard: GB a three-prong power cord
Machine size (not included prominent part): 27.3 * 19 * 7 (cm)
Package dimensions: 38.5 * 28 * 15 (cm)
Net Weight: 3.3KG,
Grross Weight: 4KG