Model | Q5s TC | Color | Titanium |
Weight | About 195g | Dimensions | About 124mm x 64mm x 16mm |
Audio Input | Standard 3.5mm Port (Shared Line / Coaxial/ Optical in) | Digital Coaxial Input Port | Standard 3.5mm Port (Shared Line / Coaxial/ Optical in) |
Digital/Optical Input Port | Standard 3.5mm Port (Shared Line / Coaxial/ Optical in) | USB Port | Micro USB(11pin) Data exchanging 、 Charging、Firmware upgrade |
Analog Input port(LO) | Standard 3.5mm stereo jack | Headphone Output Port | Standard 3.5mm stereo jack |
Balanced Output Port | 2.5mm/4.4mm port | Recommended Headphone Impedance | 16~150Ω(PO) |
16~300Ω(BAL) | |||
Channel Balance | 0.1 dB | Gain | Yes(High/Low) |
Bass Boost | Yes | Volume Control | Potentiometer(ADC Sampling) |
APP interconnection | Supports setting through App | Bluetooth codec indication | Yes |
Supports connection to Sony Walkman players | Yes | Sampling rate indication | Yes |
Deep-sleep | utomatic stand-by, can be controlled on App | Firmware upgrade | System firmware and Bluetooth version can be upgraded through USB |
Power Supply | DC5V 2A (Recommended) | Battery Capacity | 3800 mAh |
Charge Time | ≤3.5 h (DV5V 2A) | Battery Life | >25 h (AUX IN) |
>9.5 h (USB IN) | |||
>9.5 h (OPT IN) | |||
>9.5 h (COAX IN) | |||
>9.5 h (Bluetooth IN) | |||
Charging Indicator | The side blue light flashes, blue light stays on after it's fully charged. | Low Battery Warning | Red light flashes twice every 3 seconds |
Bluetooth | Bluetooth 5.0, supports AAC/SBC/aptX/aptX Low Latency/aptX HD/LDAC/HWA | MFi | Yes |
Sampling Rate Supported Up to | 768kHz/32bit(USB IN) | DSD Support(USB IN) | DSD64/128/256 |
192KHz/24bit(COAX IN) | |||
96KHz/24bit(OPT IN) | |||
Chips Used | DAC: AK4493EQ * 2 , USB: XMOS XU208 , Bluetooth: CSR8675 , LPF:OPA1642×2,Volume IC:NJW1195 OP+AMP:AD8620+OPA926 | ||
Line output specifications | |||
THD+N | <0.001% (1 kHz/10kΩ) | SNR | ≥115 dB (A-weighted) |
Frequency Response | 5 Hz~90 kHz(-3dB) | Channel Separation | >97 dB (1 kHz) |
Line level | 1.8 Vrms | ||
AM3E Headphone out specifications (3.5mm headphone out jack) | |||
Output Power 1 | ≥280 mW(16Ω / THD+N<1%) | Output Impedance | <1.2Ω (32Ω loaded) |
Output Power 2 | ≥210 mW(32Ω /THD+N<1%) | Channel Separation | ≥75 dB (1 kHz,AUX IN) |
Output Power 3 | ≥30 mW(300Ω / THD+N<1%) | THD+N | <0.002% (1 kHz) |
Frequency Response | 5 Hz~50 kHz(-3dB) | Peak Output Voltage | >6 Vp-p |
SNR | ≥117 dB (A-weighted) | Max. Output Current | 150mA (For reference) |
Max. Input Level | 3.8 Vrms | ||
Balanced headphone out specifications (2.5mm/4.4mm TRRS headphone out jack) | |||
Output Power 1 | ≥535 mW(16Ω / THD+N<1%) | Output Impedance | <2Ω (32Ω loaded) |
Output Power 2 | ≥560 mW(32Ω /THD+N<1%) | Channel Separation | ≥105 dB (1 kHz,AUX IN) |
Output Power 3 | ≥112 mW(300Ω / THD+N<1%) | THD+N | <0.002% (1 kHz) |
Frequency Response | 5 Hz~50kHz(-3dB) | Peak Output Voltage | >10.5 Vp-p |
SNR | ≥115 dB (A-weighted) | Max. Output Current | 150 mA (For reference) |
Đang cập nhật